What is the capacity of this wheeled fire extinguisher?

The extinguisher has a capacity of 45 liters.

What class of fire is this extinguisher applicable to?

It is designed specifically for Class A fires (Solid Fuel).

What operational mechanism does this extinguisher use?

It operates as a Wheeled Fire Extinguisher with a CO₂ Outer Cartridge Type mechanism.

What is the extinguishing media inside the main tank?

The main extinguishing media used is Distilled Water.

What size gas cartridge powers this unit?

It uses a 2kg CO₂ Outer Gas Cartridge.

How long is the discharge time for this extinguisher?

The required minimum effective discharge time is 13 seconds, though the actual time is approximately 80 seconds.

What is the effective reach or discharge range of the water spray?

The minimum bulk range of discharge is 6 meters, with an actual reach of about 7 meters.

What is the approved safe working temperature?

The unit can operate effectively between +5°C and +55°C.

What is the main cylinder constructed from?

The body is made from MS Sheet (Low Carbon Welded Sheet).

What is the thickness of the metal sheet used for the body?

The body is constructed using a 3mm thick sheet.

What are the dimensions of the cylinder without the wheels attached?

The cylinder has a diameter of 300 mm ± 2 mm and a height of 810 mm ± 2 mm.

What is the standard service pressure for the extinguisher?

The designated service pressure is 15 BAR.

Does the extinguisher come with a hose pipe?

Yes, it includes a 4-meter Rubber Braided hose.

How much does the fully loaded fire extinguisher weigh?

The full or gross weight of the extinguisher is approximately 80 KG ±2%.

What kind of wheels are provided with the trolley?

The trolley is equipped with 2 Solid Rubber wheels.

What steps are taken to prevent the cylinder from rusting?

The unit undergoes a 7-tank anti-corrosion process followed by an epoxy powder coating that is no less than 50 microns in thickness.

What pressure is applied during the Hydro Pressure Test?

The cylinder is tested at 35 bar (3.5 MPa) and held for 1 minute.

What approvals does this product hold?

It is approved by the BIS (Bureau of Indian Standard) under standard code IS 16018:2012.

What is included in the packaging?

The packaging includes 1 fully assembled fire extinguisher, 2 rubber wheels, and a 2kg CO₂ mounted gas cartridge.

PALEX Water Wheeled Fire Extinguisher 45L | IS 16018:2012

Description Specifications Technical Sheet FAQ

Product Description

1. General Data

Parameter	Details
Manufacturer	Palladium Safety Solutions Pvt. Ltd.
Trade Mark / Brand	PALEX
BIS Standard Code	IS 16018:2012
Type	Wheeled Fire Extinguisher CO₂ Outer Cartridge Type

2. Performance Data

Specification	Details
Capacity	45 LTR
Fire Rating	20A (Class A – Solid Fuel)
Min. Effective Discharge Time	13 Sec. (Actual: 80 Sec. Approx.)
Min. Bulk Range of Discharge	6 Mtr. (Actual: 7 Mtr. Approx.)
Min. Percentage of Discharge	95% (Actual: 97% Approx.)
Working Temperature	+5°C To +55°C
Service Pressure	15 BAR
Maximum Service Pressure	17 BAR

3. Material of Construction

Component	Material Details
Body	MS Sheet (Low Carbon Welded Sheet having max. of 0.25% C, 0.05% P and 0.05% S (IS 513))
Extinguishing Media	Distilled Water
Neck Ring	MS pipe (Filling Dia Ø 74 mm)
Cap	Brass
Syphon Tube	MS pipe
CO₂ Gas Cartridge	2kg CO₂ Outer Gas Cartridge
Hose Pipe	Rubber Braided (Length = 4 mtr)
Carrying Handle	Powder Coated MS pipe
Safety Seal	PVC Plastic
Safety Pin	Aluminium
Trolley Wheel	Solid Rubber

4. Quality Test

Test	Details
Hydro Pressure Test (Pt)	35 bar (3.5 MPa) – hold for 1 min.
Min. Burst Pressure (Pb) for Body	55 bar (5.5 MPa) – hold for 1 min.
Burst Pressure Test for Discharge Hose	Not less than 50 kgf/cm²

5. Dimensions

Specification	Details
Diameter	300 mm ± 2 mm
Height	810 mm ± 2 mm (Without Wheel)
Thickness	Made up from 3mm Thick Sheet
Full/Gross Weight of Extinguisher	80 KG ±2% (Approx.)

6. Anti-Corrosion Treatment

The extinguisher undergoes a 7-tank anti-corrosion process, followed by an epoxy powder coating of no less than 50 microns in thickness.

7. Miscellaneous

Specification	Details
Inspection & Testing	As per approved QAP
Finish	PO Red as per IS:5 (Shade 538)
Marking	As per IS 16018:2012
Approvals	BIS (Bureau of Indian Standard)
Maintenance, Care and Refilling	As per IS 16018:2012

8. Packing

Corrugated paper or suitable jute bags.

9. In Box Accessories

Item	Quantity
Fire Extinguisher	1 No (Fully Assembled)
Rubber Wheel	2 Nos
Gas Cartridge	2kg CO₂ Gas Cartridge (Mounted)

Technical Specifications

Specification	Details
Capacity	45 LTR distilled water
Fire Rating	20A
Fire Classes	Class A (solid fuel)
Type	Wheeled, CO₂ outer cartridge (2 kg)
Discharge Time	~80 seconds
Discharge Range	~7 m
Hose	Rubber braided 4 m
Gross Weight	80 kg ±2%
Dimensions	300×810 mm (dia × H, without wheel)
Temperature	+5°C to +55°C
Standard	IS 16018:2012 (BIS)