Service   Fire Fighting & Equipments !



Fire Fighting & Equipments !


Fire Fighting & Equipments !

Fire incidents are one of the largest catastrophes that Needs to be prevented... No safeguards are good enough in case a detection mechanism and instant remedial measures are not ensured. Hence, fire would be treated at two different planes: Installation of efficient fire alarm system, such as conventional smoke detectors, heat detectors, fire detection sensors, wireless fire alarm panel, etc., to detect the incident of fire or any other miss-happening at early stages. Being one of the top addressable fire alarm system dealers we also provide advanced wireless fire alarm system such as Wireless smoke detector, addressable smoke detectors and more. Installation of efficient fire fighting equipments/fixtures in the premises to curb any sort of fire in building. Installation of sufficient number of fire extinguishers to extinguish any sort of Fire. For proper and efficient use of fire fighting equipments like fire cylinders, both the security staff and the client’s staff at the premises needs to be properly trained We provide services involving all the above mentioned remedial actions including installation & maintenance of all kinds of Fire Fighting equipments, Fire fighting systems, Fire Alarm Systems & Fire Safety training. Our purpose is to give services pertaining to fire exits, fire suppression systems, fire extinguishers, emergency action plan.


Fire Safety Equipment Installation & Maintenance.

Our expertise has enabled us to provide an impeccable spectrum of services related to installation & maintenance of all kinds of fire fighting equipments which includes the followings in which our company deals. We take pride in saying that we are a notable fire safety equipments supplier and fire extinguisher supplier also providing fire extinguisher refilling services as a part of maintenance.



Hydrants & its Accessories:-

A well-designed wet riser/hydrant system is the backbone of fire protection systems for modern buildings and is mandated by the local Fire Brigade, insurance authorities and other regulatory bodies. A typical building normally has two or more shafts, which travel from the lowest level of the building to its terrace. Such shafts are normally used to carry the piping for the wet-riser systems. Hydrant outlets are provided on every floor so that the entire floor area of the building is adequately covered.

Outlets are provided in the form of double-outlet landing valves. Apart from a canvas hose for the use of fire-fighting personnel in the event of fire, a rubber hose of 20 mm diameter is also provided, mounted on a hose-reel drum to enable volunteers from the general public to help fight incipient fires.

All wet-riser pipes remain charged with water at systems pressure. The opening of a hydrant landing valve or hose reel on any floor reduces the pressure in the pipeline and starts the hydrant pump. Pump-sets of suitable capacity are provided for this purpose. Apart from the wet riser system, hydrant points should also be provided at strategic locations around the building at ground level. These ‘yard hydrants’ are of immense use on fire fighting.

Water must be made available through reservoirs in adequate quantities at convenient locations. Periodic drills should be conducted by opening the hydrant valves to ensure proper operation of the systems.

Hydrant Systems can be of two types :(a) External Hydrant System, where the hydrants are installed in the open, like the city or town water mains, or hydrant systems installed in the open areas in industrial or such other occupancies; and (b) Internal Hydrant System, installed in buildings or structures to be protectedWe design an integrated Hydrant System as per national and international norms. We consider capacity of fire pump, size and arrangement of pipes used for hydrant system, pressure at hydrant point against the available fire risk. Our designed Hydrant System is an arrangement of piping, valves, hose connection and allied equipment installed in building and structure with connection located in such a manner that water can be discharge in stream of spray patterns through attached hose and nozzle for the purpose not only extinguish the fire but at the same time save the occupants and contents of area in with better response time.



SPRINKLER SYSTEM

A fire sprinkler system is an active fire protection measure, consisting of a water supply system, providing adequate pressure and flow rate to a water distribution piping system, onto which fire sprinklers are connected. Although historically only used in factories and large commercial buildings, home and small building systems are now available at a cost-effective price. These sprinklers are manufactured by leading fire fighting equipments manufacturers and thus product performance is assured.



DIESEL, JOCKEY & FIRE MAIN PUMP SET

Pump-sets of suitable capacity are provided for water supply to hydrants & sprinkler systems. Because of the static pressure differential caused by the change in floor height, a multi-stage pump is employed so that different tapping can be taken from the output of the pump. Each of these tapping can be used to serve more than one floor. Pumps-sets should be fed with reliable electric supply from a separate feeder and it is therefore also desirable to have a stand-by diesel pump.



Flooding System

 CO2 Flooding System

CO2 Fire Extinguishing System is a total Flooding system for the protection of machinery spaces, pump rooms and cargo holds. It can be designed as a central bank and with a local protection of smaller spaces such as Paint Locker, Purifier Room, Galley Exhaust Duct etc. Cargo Holds Smoke Detection System can also be included in the CO2 System. The number of CO2 cylinders is calculated according to the size of the largest protected area. In a central bank system, more than one space can be protected. This advance system is developed by authorized and renowned fire safety equipments manufacturers in the world

CO2 Fire Extinguishing System is built-up using standardized components

  • CO2 Valves
  • CO2 Cylinder and Assembly
  • Manifold Pipe with Check Valves and Flexible Hoses
  • Distribution Cabinet, Time Delay Unit and Release Tubing
  • CO2 Distribution Piping and Nozzles
  • Alarm and Shut Down

 

The CO2 cylinders, distribution valves are located in a central location. The system is activated manually from the release cabinet located in the Fire Station or just outside the CO2 Room. When activated, the pilot gas opens the main valve of the space on fire and the CO2 cylinders after a time delay. At the same time, alarm is activated to warn personnel in the area. CO2 gas is discharged into the space within 2 minutes



FM200 Flooding System

FM-200 Engineered Fire Suppression Systems are designed for total flooding in accordance with NFPA 2001, This system is Environmentally-friendly and preferred fire suppression system for vital facilities that can’t afford fire-related business interruption of process controls, automated industrial operations, robotics, etc. Active on fire, but inert on people; non-toxic when used per NFPA Standard 2001. Safe, no-residue protection for Class A, B and C fires. Designed for maximum protection with minimum hardware; less space, lower cost.



FEATURES

  • Zero Ozone Depletion – No Phase out Schedule.
  • Perfectly Safe for Occupied Areas.
  • CCOE Approved Seamless Cylinder.
  • Less hardware compared to other Inert gas.
  • Low maintenance.
  • Low-pressure system – Gas stored at 25 bar.
  • Engineered, pre-engineered or modular systems.
  • Clean leaving no residue. Safe for discharge into occupied spaces.





Developed And Maintained By Electrovese Solutions